What are the Best Scissors for Electricians in 2022?

Electrician scissors are one of the best go-to partners for electricians.

Such scissors are basically designed with a serrated surface on the blade’s back for cleaning different wires and even for stripping them; they are hardy and can cut easily through anything.

Rank	Picture	Model	Rating	Shop
#1		Klein Tools 2100-8 Scissors	9.7/10	Check Price
#2		Fluke Networks 44300000 D-Snip Cable Scissors	9.6/10	Check Price
#3		VamPLIERS VT-011 Super Combo Scissors	9.5/10	Check Price
#4		KNIPEX Tools - Electrician's Shears	9.3/10	Check Price
#5		C.JET TOOL Stainless Electrician Scissors	9.2/10	Check Price

However, they are not for resharpening, i.e., if they become impotent, you should discard them and purchase a new one. Currently, most businesses have been creating durable scissors that are long-lasting and can hold up way better than the previous ones.

Investing in such costly scissors is good if the task needs cutting. There are numerous kinds of electrician scissors in the market that come with specific designs and have different cutting jobs. So, you will find electricians switching in between multiple tools.

Here, we will list the best electrician scissors ranked based on their preference and efficiency. 

Winner: Klein Tools 2100-8 Scissors

Klein Tools 2100-8 Scissors provides ease of use owing to the free fall snip feature. Its stainless steel blades help maintain blade sharpness and durability.

You can cut electrical communication of 19 AWG and 23 AWG wires. This Klein Tools 2100-8 Scissors comes with an extended handle, which provides excellent comfort. Klein electrician scissors make it simpler to use due to the freefall design.

The stainless steel construction allows you to maintain the blade sharpness. The electrical scissors, along with an extended handle, help you to perform work with ease.

• Size: 10 x 10 x 10 inches
• Material: Stainless steel
• Style: Freefall snip

Benefits

• It comes with a stainless steel blade to maintain the sharpness and durability of the blade
• The blade is wholly serrated to prevent non-slip cutting actions
• Can cut easily electrical communication of 19 AWG and 23 AWG wire
• Caters ease of use owing to the free fall snip feature
• The extended handle caters to comfort and helps you leverage the wire cutting activities with ease

Drawbacks

• When using the scissor, ensure to wear an approved eye protection gear as it is not insulated and cannot protect you against any electric shock.

Extra Features

Their freefall snip features high-quality stainless steel blades, sharp and durable. They can even cut electrical communication wire, cordage, and cable of 19 AWG and 23 AWG.

The extended handle caters to you with comfortable cutting and provides good leverage in wire cutting. Due to its freefall designs, you can use them efficiently. 

Buying Advice

As a buyer, you should know that for over 160 years, the brand Klein Tools has been in the industry manufacturing premium quality and professional-grade hand tools. They have ensured the durability, performance and precision required to get the needed job done with ease and simplicity.

Their family of workers, engineers and craftsmen continue putting six generations of expertise, solution and ideas into the tool they create by utilizing just the highest grade material and superior workmanship. 

Runner-up: Fluke Networks 44300000 D-Snip Cable Scissors

Fluke electrician scissors are good quality forged steel construction for durability and strength. Scraper and file on both blades are best for cleaning wire. You can use the notched edge for stripping 19 and 23 gauge wire.

The serrated blade is prudent for non-slip wire cutting. Fluke Networks 44300000 D-Snip Cable Scissors is a D snips cable electrician scissor. Its completely high-quality steel construction offers durability and strength.

• Size: 4 x 1 x 9 inches
• Material: High quality forged steel
• Style: Snips Cable Scissors

Benefits

• Have unique ergonomically designed scissors handle
• Made with good quality forged steel
• Lowers hand fatigue

Drawbacks

• Handles are small and best suited for those with thin fingers

Extra Features

The versatile electrician snip comes with a scraper and file on both blades for simple wire cleaning. Also, they feature a handy notch scissor blade for instantly stripping off 19 and 23 gauge wire.

Buying Advice

You should know that this scissor is made to last for a long due to their excellent quality forged steel as a buyer. Thus, such snips are sure to carry for your tool bag. 

Alternative: VamPLIERS VT-011 Super Combo Scissors

The VamPLIERS VT-011 Super Combo Scissors can cut any material with ease. Such materials include leather, wire, fabric, paper, CD, rope, cabtyre cord, thin films and branches.

The VamPLIERS VT-011 Super Combo Scissors can easily cut through the steel and copper wires. Micro serrated blades can prevent any slippage of the material that is being cut. Prudent for light industrial utilization.

Box openers located on the outside edge of the scissors can safely open any box. For safety, a blade cover is even included. It comes with ergonomic handles.

• Size: 3.5 X 0.5 X 7 inches
• Material: Carbon steel
• Style: Multipurpose compact design

Benefits

• It can easily slice through a copper wire, cut insulated cables, snip off nylon and fiberglass wires, shear leather hide. Thus, it is entirely meant for multipurpose use. 
• Micro serrated blade helps prevent slippage of the material that is being cut.

Drawbacks

• The handles of the scissor are tiny

Extra Features

VamPLIERS VT-011 Super Combo Scissors is one of the best cutting instruments. It has been spectacularly designed, compact, and strong enough to do the job perfectly. The instrument comes with four functions in a single set of scissors.

Functions include a sharp blade for regular cutting activity and a micro-serrated blade for quickly cutting without slipping. It consists of a box cutter feature for cutting a box when closed. Lastly, it even acts as a wire cutter. 

Buying Advice

As a user, you should know VamPLIERS scissors is an ergonomic handle designed for comfortable slip-resistant grip and includes numerous important features owing to its multipurpose nature.

It is made of carbon steel in Japan. S-shaped grips in the scissors are designed to convey the most applied pressure to blades. 

Alternative: KNIPEX Tools – Electrician’s Shears

The KNIPEX Tools is a precision grade tool for performing cutting tasks easily and quickly. You can use them extensively for doing precise tasks.

The KNIPEX Tools Electrician’s Shears is the number one choice of the tradesman. It is very comfortable to use and quality assured design. The tool is proven and tested catering durability.

• Size: 6.27 x 3.17 x 0.76 inches
• Material: Steel
• Style: Precision grade tool

Benefits

• Highly comfortable to work with and made of high quality

Drawbacks

• Pricy product

Extra Features

The electrician scissors’ precise ground blades are made of stainless steel with completely fine serration for a non-slip and clean cut.

Their cutting-edge features easily integrate cable cutter, perfect for cutting off wires and soft cables. You can wear a plastic case/holster on the belt for instant accessibility.

Buying Advice

KNIPEX scissors are best for anyone conducting low voltage electrical tasks. Blades have precisely been prepared from stainless steel. They feature fine serration for non-slip, clean cutting of any wire.

Alternative: C.JET TOOL 6″ Stainless Electrician Scissors

The C.JET TOOL 6″ Stainless Electrician Scissors come as a whole steel frame. They have an entire steel frame for durable life and high resistance.

The high-quality hardness blades and anti-slip serrated edge of the C.JET TOOL 6″ Stainless Electrician Scissors are best for making precise cuttings. Their soft cable of nearly 1/0 AWG, the cross-section area of 50 mm2, a diameter of 8.5 mm endows it to notch blade cutting potential. 

• Size: 8.1 x 5.8 x 1.1 inches
• Material: Stainless steel
• Style: Serrated

Benefits

• It has high-quality hardness blades with an anti-slip serrated edge for precise cuttings

Drawbacks

• Avoid cutting materials that are processed with heat treatment like piano etc. Cutting such heat treatment materials can create damage to blades.

Extra Features

Ergonomically designed scissor handles: Strong and light handles are made from high impact resistance plastic substance. It is embedded with an anti-slip ridge on the grips.

Buying Advice

It comes with serrated blade cutting potential and best for those users looking out for this feature.

Electrician Scissors FAQ

How Do You Sharpen Electrical Scissors?

You probably have opted for getting your kitchen knives sharpened regularly as a user. However, do you remember the last time you got your electrician scissors sharpened?

Among most, the answer is probably never. That is very bad as sharp scissors can cut cleanly and quickly, and restoring a blunt scissor to a razor-like sharpness is no more challenging than sharpening knives.

Now, you can buy sharpeners which are specially prepared for sharpening scissors. Here, we will list four ways to sharpen your blunt electrician scissors.

Use Sharpening Stone

A sharpening stone also called bench stone, or a whetstone, is one of the simplest and most traditional ways to sharpen your scissors. Note that a stone comes with two sides; generally, one is the coarse/fine 400 grit surface and the other is a more refined 1000 git surface.

Begin sharpening from the coarse /fine side of your stone. Begin by wetting the stone surface with either plain water or oil. Next, lay the inside surface of the scissor blade flat on the stone. On it, apply a light downward pressure and draw simply the blade across the sharpening stone’s whole length, moving from base to tip.

Based on the blade’s dullness, ten to twenty strokes would generally be sufficient. Next, utilize a permanent marker for drawing black lines along the blade’s sloped cutting edge. Lines would act as visual guides, which indicate when you sharpen the whole edge.

Ensure the blade on stone and adjust the same, where the beveled cutting edge is completely flat against the sharpening stone. When maintaining the angle, draw the scissors blade across the sharpening stone 5 or 6 times. Stop and check out the black ink line to ensure you are holding the blade at a proper angle.

Carry on sharpening till the black line completely is gone and the whole edge is again shiny, which indicates that the blade now is sharp. Once you have sharpened, check out the burrs along the scissor blades’ inner edge.

Remove burrs by laying the inner edge of the blade flat on stone and then draw it lightly across the sharpening stone. Now you require flipping off the stone over the wet surface and hone the cutting edge of the blade to sharpness by easily drawing their beveled edge across the completely fine grit side of the stone.

Note that again nearly 10 to 20 strokes would be fine. Ensure to repeat the steps mentioned above to sharpen and hone other of your scissor blades. 

Use Rotary Tool

The hand-held rotary tool, also known as the Dremel tool, is an entirely versatile electric tool that accepts a wide range of accessories involving rotary abrasive stone, ideal for sharpening purposes.

Begin by securely clamping your scissor blades into a vise with their beveled cutting edge just facing up. Then, position an aluminum oxide-based grinding stone into a rotary tool and ensure to tighten col-let nuts.

When holding tools firmly with your hands, turn on the rotary tool’s motor and set the grinding stone lightly against the beveled edge. Now it is crucial to hold up the stone at a similar angle as the beveled edge and keep the stone moving at all times.

In case you stop in a single spot for a second, you may grind a hollow spot in your blade. Just by utilizing little pressure, slowly pass on the rotating stone across the beveled edge from the base to tip 8 to 10 times. In case you feel any burrs on the flat side of the blade, ensure to grind it with stone. Repeat similar steps listed above to sharpen your next scissor blade. 

Slice Sandpaper

You can use the two sharpening measures we have delineated above for extraordinarily damaged or dull scissors. However, if your electrician scissors are not working and cutting abruptly, then try out this trick.

Take a slice of sandpaper of 150 grit aluminum oxide material and fold it into half in a way that the abrasive surface faces out. Now, utilize your scissors to cut through the sandpaper in narrow strip form.

Ultimately be sure to prepare total stroke cuts and expose the blade’s whole cutting edge to sandpaper. Abrasive particles on sandpaper’s surface will act as a tiny sharpening stone that hones your cutting edge of both blades simultaneously.

Wipe off the blades with a paper towel or cloth to eliminate the abrasive grit—even test electrician scissors by making numerous cuts on any scrap paper. If required, repeat a similar process. 

Cut Aluminum Foil

This technique is the same as cutting sandpaper; just here, you use aluminum foil. Again, it will hone those electrician scissors, which are slightly dull, but it will not sharpen those scissors with damaged or worn blades.

Begin by tearing a 12-inch long foil piece. After this, ensure to fold the foil sheet numerous times till it is at least six layers thick. Now, slice the foil packet with scissors into 10 to 12 strips using complete stroke cuts.

Ensure to test the electrician scissors sharpness by cutting off some scrap paper. If necessary, cut off several foil strips until the scissors cut cleanly and quickly. Finally, wipe off the scissors blades to remove any tiny aluminum bits. 

How Do You Hand Sharpen Scissors?

Over time and with constant use, most electrician scissors ultimately become dull and loose sharp edges they possessed once when you initially purchased them.

In case you are having any problem cutting with blunt scissors, you may consider buying another pair as electrician scissors are relatively less costly.

However, there are various ways to sharpen your electrician scissors at your home with the help of some everyday household products and some practice.

Sharpening with Sandpaper

Sandpaper sheets of 150 to 200 grit works just as well as you can go for a bit of finer grit if you are looking for smoother edges of scissor blades. Fold the sandpaper into equal halves with a rough surface facing outward.

Cut through sandpaper into long strips of about 10 to 20 times. After this, you will notice the scissors blades have become sharper with each sandpaper strip cut. Utilize complete scissor strokes, starting the cutting at the base of scissors and extending to the tip.

Wipe Off Your Scissors

Wipe your scissors with a damp paper towel to remove sandpaper bits that might have collected on the scissors blade when sharpening the scissors. 

Use Aluminum Foil for Sharpening

Aluminum foil should be about 8 to 10 inches long and fold the exact lengthwise several times so that you get a folded, thick strip of foil. The added layers of aluminum foil helps in sharpening scissors blades several times with each foil cut.

Cut the aluminum foil strips with scissors. Use complete scissor strokes, begin cutting from the start till the scissor base, and extend to the tip. Basis the width of the foil strips you cut, ensure to sharpen your electrician scissor blades well or just a bit. Wipe off Scissors

Wipe off your scissor blades with a paper towel, which the warm water should dampen. It will clean the aluminum debris that gets clung to blades as you cut.

Sharpen Scissors with Sharpening Stone

Sharpening stones are generally found in hardware stores and can be utilized to sharpen any blade you have. Usually, sharpening stones have two sides, used for sharpening knives, a grainier side and a good side.

Those with dull scissors should begin using the grainier or coarse side of stone and after this, they should use the more pleasing surface of sharpening stone for finishing it up. In case the scissors require extremely light sharpening, you need to use the more delicate side of the sharpening stone.

Place a towel underneath the sharpening stone and lubricate it well with honing oil or water. Rubbing oil can be found in a similar store where you bought the sharpening stone. Remove all screws attached to the scissors.

Do so to sharpen each of the blades separately in a proper manner. It even gives you enhanced mobility while sharpening the scissors blades. Place one scissors blade on stone with the blade’s inner side facing downwards. You would want to create an excellent sharp angle between the inner blades and cutting edge.

The point where the two edges meet is a perfect area requiring sharp cutting off things. Grip the scissor blade’s handle and slowly pull the blade across the stone towards yourself, keeping the blade’s edge flat against the sharpening stone. Ensure to repeat this measure carefully till the blade is sharpened. It must take nearly 10 to 20 pulls. Repeat the same step with another scissors blade.

How Long Do You Have to Be an Electrician Apprentice?

Electrical apprenticeship programs vary in length as they are two to five years long. For the wireman program, every electrician apprentice gets a minimum of 8000 hours of on job training in the electrical industry with a journeyman electrician’s supervision. Also, apprentices even get between 700 and 900 hours of classroom instruction throughout the program. 

There are times when apprentices complete the needs for electrician licensing examination before they complete school. However, they still require meeting apprenticeship needs to graduate. Each apprenticeship is independent and has its gist of guidelines concerning enrollment and scheduling classes.

Note that you may get classes either two times a week at night or in the day just once a week or in any weekly sessions. Apprenticeship, which you select to attend, provides a minimal amount of academic education hours the state licensing agency needs for electrician apprentices to attain their licenses. 

How Much Does A 1st Year Apprentice Electrician Earn?

1st-year apprentice electrician wage is a percentage of what journeyman electrician earns. For instance, in 1st year, the average payment rate is $18.44 each hour.

After working for 1000 hours, electricians can expect a modest wage to increase. As they gain experience, their pay gets enhanced incrementally. Those who become master electricians can look for annual earnings of nearly $51,110 as per the Bureau of Labour Statistics. 

Conclusion

Have you decided which scissors you should purchase? The above measure is to figure out where you should buy it from.

You have various options to buy them, from hardware and do it yourself (DIY) stores to departmental stores. However, you can even consider purchasing electrician scissors online.